Payment & Shipping Terms:
|Material:||Plastic||Color:||Black Or White|
|Connecter:||C8||DC Cable:||1.2m 1.5m 2m|
|AC Cable:||USA AU AUS UK FOR You Choose|
massage chair adaptor
The range of input voltage is from 100 to 240VAC .
The range of input frequency is from 47 to 63 Hz .
The maximum input current is1.6A at 100Vac at load2.0A
The inrush current will not exceed 50 A at 240Vac input, cold start, 25℃.
Testing Condition:AC100V,+/-10% or AC240V,+/-10% @50/60Hz, no load.
|No load||AC100V,+/-10%||Max. 0.5 W|
|AC240V,+/-10%||Max. 0.5 W|
|No load||Max. 50mA|
1.6.2 Efficiency(Input Voltage:115VAC or 230VAC)
The efficiency (watts out / watts in) is higher than 85 % typical while
measuring at nominal line and rated load.
|Input Voltage||Voltage||Min load||Rated load||Cut Off Current|
|110-240VAC||DC29 V||0A||2.0A||6.5A-11 A|
The output voltage shall be statically regulated for all combinations of load, line and environment including cross regulation as shown.
2.3 Ripple and Noise
|Output#||Voltage /Current||Maximum ripple & Noise|
|1||+29.0V / 2.0A||200 mVp-p (Ripple)|
|400 mVp-p (Noise)|
Measument is done by 20MHz bandwidth oscilloscope and terminated each output with a 10uF capacitor and a 0.1uF capacitor.
Condition: Input 100-240Vac at load current 2A
5%/℃ typical on all output.
The power supply shall be shutdown when output voltage reaches to its over – voltage protection trigger point 38V
When operating any output under any line condition, into an over load condition for an indefinite period of time. The power supply shall be self – recovering when fault condition remove.
The power supply shall be capable of operating continuously in any mode without performance deterioration in the following environmental conditions.
The power supply shall be capable of standing the following environmental conditions extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies:
5.1 Cord bending test
The DC cord shall withstand weight of 500g,it swing from left to right at angle of 120 degree, 40 times per min, more than 1000 times.
5.2 Strain relief test
Fix the main part of the adapter ,Plug and cord at their normal position applied a weight of 5 Kg to output for 15 seconds.
5.3 Vibration test
Time: 10times per directions (X,Y,and Z)
The weight of the power supply: Approx. 280 g
The dimension of the power supply is118MM(L)X 60.3MM(W)X37.2M(H)
Welcome to OEM/ODM
Sample time : 3-5days
Trade terms: FOB shenzhen
Payment : T/T ,L/C,PAYPAL ,Western Union
All product warranty 3 years(One years damage one to one exchange.)
Printing you LOGO and stick you modle also ok .
Power adapter ,Charger ,Power supply Manufacture
What's app: 86 13412619588